For about a week, I found myself tiring quickly and on medication that will mask the symptoms. I think really that the virus just goes into hiding, resting until the medication wears off to renew its onslaught. I've felt better, but I've felt far worse as well.
I've felt good enough now over the last week (with just a lingering cough and humidity/smog triggered asthma) to resume my work on the cabinet. While I was sick and refusing to mix medication with power tools, I put the time to good use and first did some research on options. I discovered that centre mount drawer slides were the least amount of work and would not compromise quality.
Having learned some from my experiences, I decided to query the good people that hang out on Lumberjocks as to the best way to mount them. Lumberjocks really is a great community and it didn't take long to get the information I needed. A single board running up the centre of the cabinet with some support rails mortised into it running from the back to the front in which to mount the fixed part of the slide.
Today I finished the cabinet by adding the drawer hardware. While I feel relief that the first project conceived in the shop is done, I know that there will be modifications needed. A door perhaps over the hangers section; and, doors over the shelves. Maybe add pull out boxesor the bottom cubbies? It's really a bit of a let down to know that a project you want to consider done is not really quite done.
For now there's other priorities. Like building my workbench. Anticipation once again is rising!
Having learned some from my experiences, I decided to query the good people that hang out on Lumberjocks as to the best way to mount them. Lumberjocks really is a great community and it didn't take long to get the information I needed. A single board running up the centre of the cabinet with some support rails mortised into it running from the back to the front in which to mount the fixed part of the slide.
Today I finished the cabinet by adding the drawer hardware. While I feel relief that the first project conceived in the shop is done, I know that there will be modifications needed. A door perhaps over the hangers section; and, doors over the shelves. Maybe add pull out boxesor the bottom cubbies? It's really a bit of a let down to know that a project you want to consider done is not really quite done.
For now there's other priorities. Like building my workbench. Anticipation once again is rising!
Well, I like it. I think its something she can grow into and use in different ways.
ReplyDeleteHope your feeling better. Summer colds DO bite.